A projector lift is a helpful tool. It hides your projector in the ceiling and brings it down when needed. But like any machine, it needs care. If you don’t use it correctly, it can stop working or get damaged.
In this post, we’ll talk about common mistakes people make with projector lifts and how to avoid them—especially if you’re using a Draper projector lift.
1. Installing It Without Enough Space
One of the biggest mistakes is trying to fit a projector lift in a ceiling that’s too tight. The lift won’t work properly if the space above the ceiling is too small.
What to do instead:
Before installing, measure the space and make sure there’s enough room for the lift to move freely. If you’re not sure, ask a technician.
Tip:
The AeroLift Series by Draper has different models for different spaces. Choose the right one that fits your room.
2. Using the Wrong Lift for Your Projector’s Weight
Not all lifts are the same. Some are made for light projectors, while others are for heavy ones. Using a small lift for a big projector can damage it.
What to do instead:
Check how much your projector weighs. Then, match it with a lift that can hold it. For example:
- AeroLift 35 is for lighter projectors.
- AeroLift 150 is for heavier ones.
Bonus tip:
Evig, one of the best audio visual companies in Dubai, can help you pick the right model. They know the complete range of Draper projector lifts.
See also: Top 4 Mental Health Sources That Work with TRICARE West
3. Forgetting About Cable Management
Are cables hanging everywhere? That’s not just messy—it can damage your lift too. If wires get stuck while the lift moves, it can cause a jam or even a short circuit.
What to do instead:
Use lifts with built-in cable guides. The Scissor Lift Series by Draper has a smart system that keeps cables neat and safe.
Always keep cables out of the way before using the lift.
4. Skipping Regular Checks
Many people think that once the lift is installed, it’s done forever. But without regular checks, small problems can turn into big ones.
What to do instead:
Look at the lift once every few months. Is it moving smoothly? Are any screws loose? Is it making noise?
If something feels off, stop using it and call a technician.
5. Using the Lift Too Roughly
Some users keep pressing the up/down buttons repeatedly, or they stop the lift halfway. Doing this too often can wear out the motor.
What to do instead:
Use the lift gently. Let it go up or down before pressing the button again. This keeps the motor safe and working longer.
6. Trying to Fix It Yourself When Something Breaks
It’s tempting to try to fix things yourself, especially minor issues. But if you make one wrong move, you could break something pricier.
What to do instead:
If the lift doesn’t work correctly, don’t open it up. Instead, call a trained technician or speak to experts at Evig, one of the top audio visual companies in Dubai. They are also the official distributor of Draper projector lift models in the UAE.
7. Not Thinking About Power Limits
Projector lifts need the right amount of electricity to work well. If you plug them into the wrong outlet or overload a power board, the motor could be damaged.
What to do instead:
Always check the power needs before plugging in. The Scissor Lift SLX has built-in UL-certified outlets to make things safer and easier.
8. Ignoring the User Manual
Some people skip the user manual and try to figure things out independently. But each lift has its way of working. Even small details like how to press the buttons or how long to wait can make a difference.
What to do instead:
Always read the manual that comes with your Draper projector lift. It has helpful instructions that can save you from doing something wrong. Taking five minutes to read it can stop future problems.
9. Using the Lift in a Dusty or Dirty Room
Dust and dirt can get into the lift’s moving parts, making it slow or noisy. Over time, this can wear it down and affect its performance.
What to do instead:
Keep the room clean, especially the ceiling area where the lift is installed. If you’ve not used the projector lift for a long time, wipe around it gently before using it again. A clean setup helps the lift last longer.
Final Words: Take Small Steps, Avoid Big Problems
Using a Draper projector lift correctly is not hard. Just avoid the mistakes we discussed and follow the instructions.
Following these tips, your projector lift will work better and last longer.
And remember—if you need help, contact Evig, one of the best audio visual companies in Dubai. They know what works, and they’re always ready to guide you.
